Coupling Grease

Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is exclusively intended for gear coupling applications to increase coupling existence though significantly minimizing upkeep time. Its higher viscosity base oil and tackifier combine to keep the grease in place and prevent separation and it’s in finish compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces normally discovered in couplings. Bearing or general purpose greases are inclined to separate and reduce effectiveness resulting from higher centrifugal forces on the various components at high rotational speeds. These high centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication attributes, accumulate within the gear tooth mesh area leading to premature coupling failure. Gear Coupling Grease is developed to remarkably resistant to centrifugal separation with the oil and thickener, which enables the lubricant to get utilized for any rather lengthy period of time.
Among the secrets for the achievement of Gear Coupling Grease is definitely the variable consistency throughout the functioning cycle on the application. The consistency of our gear coupling grease adjustments with all the operating situations. Functioning on the lubricant beneath actual service problems triggers the grease to turn out to be semi-fluid, functionally solash lubricating the put on surfaces with the coupling. Since the grease cools, it returns on the original consistency, therefore stopping leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Features
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
High load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location beneath higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.