Product Description
Conveyor Pulley is manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.
| Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source. |
| Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths. |
| Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction. |
| Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths. |
| Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system. |
The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) .
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided.
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.
| PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley. |
| DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt. |
| HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel. |
| CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also. |
| CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley. |
| WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt. |
The Components of Pulley:
| 1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing. |
| 2.Diaphragm Plates: The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements. |
| 3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped. |
| 4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates. |
| 5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates. |
| 6.Lagging: It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material. |
| 7.Bearing: Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing. |
The Production Process of Pulley:
Our Products:
| 1.Different types of Laggings can meet all kinds of complex engineering requirements. |
| 2.Advanced welding technology ensures the connection strength between Shell and End-Disk. |
| 3.High-strength Locking Elements can satisfy torque and bending requirements. |
| 4.T-shape End-Discs provide highest performance and reliability. |
| 5.The standardized Bearing Assembly makes it more convenient for the end user to replace it. |
| 6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque. |
| 7.Low maintenance for continued operation and low total cost of ownership. |
| 8.Scientific design process incorporating Finite Element Analysis. |
Our Workshop:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Carbon Steel |
|---|---|
| Surface Treatment: | Baking Paint |
| Motor Type: | Frequency Control Motor |
| Samples: |
US$ 40/Piece
1 Piece(Min.Order) | Order Sample Free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety considerations should be kept in mind when working with V pulleys?
Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:
1. Proper Guarding:
Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.
2. Lockout/Tagout Procedures:
Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.
4. Training and Education:
Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.
5. Inspection and Maintenance:
Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.
6. Load and Speed Limits:
Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.
7. Risk Assessment:
Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.
It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.
Can V pulleys be used in both simple and complex mechanical systems?
Yes, V pulleys can be used in both simple and complex mechanical systems. Their versatility and effectiveness make them suitable for a wide range of applications. Here’s a detailed explanation:
1. Simple Mechanical Systems:
In simple mechanical systems, V pulleys are often used in basic power transmission setups. These systems typically involve a single driving pulley connected to a driven pulley by a V-belt. The simplicity of the setup allows for easy installation and maintenance.
Simple mechanical systems utilizing V pulleys are commonly found in applications such as:
- Small machinery and equipment
- Home appliances
- Power tools
- Fans and blowers
- Pumps
2. Complex Mechanical Systems:
V pulleys are also employed in complex mechanical systems where multiple pulleys, belts, and components are interconnected. These systems require precise power transmission, synchronization, or speed control.
Complex mechanical systems that utilize V pulleys can be found in various industries, including:
- Automotive: V pulleys are used in engines, transmission systems, and accessory drives.
- Manufacturing: V pulleys are found in conveyor systems, industrial machinery, and production equipment.
- Agriculture: V pulleys are used in tractors, harvesters, and irrigation systems.
- Mining: V pulleys are employed in conveyor belts for material handling.
- Construction: V pulleys are used in construction machinery and equipment.
- HVAC (Heating, Ventilation, and Air Conditioning): V pulleys are utilized in air handling units, fans, and compressors.
3. Advantages in Both Simple and Complex Systems:
V pulleys offer several advantages that make them suitable for both simple and complex mechanical systems:
- Cost-Effective: V pulleys are generally affordable and provide efficient power transmission at a lower cost compared to other drive systems.
- Wide Range of Speed Ratios: By using pulleys of different sizes, V-belt drive systems can achieve a wide range of speed ratios to meet specific application requirements.
- Shock Absorption: The elasticity of V-belts allows them to absorb shock and vibration, reducing stress on the pulleys and other components.
- Quiet Operation: V-belt drive systems produce less noise compared to direct drives, making them suitable for applications where noise reduction is desired.
- Easy Installation and Maintenance: V pulleys are relatively simple to install and maintain, making them accessible for various users and applications.
Overall, the versatility, reliability, and cost-effectiveness of V pulleys make them viable options for both simple and complex mechanical systems, providing efficient power transmission in a wide range of applications.
What advantages do V pulleys offer for power transmission?
V pulleys, also known as V-belt pulleys or sheaves, offer several advantages for power transmission in various applications. Here’s an explanation of the advantages provided by V pulleys:
1. High Efficiency:
V pulleys provide high efficiency in power transmission. The V-shaped groove on the pulley and the corresponding trapezoidal cross-section of the V-belt create a wedging action that enhances the grip between the pulley and the belt. This improved grip minimizes slippage and ensures efficient power transfer, resulting in higher overall system efficiency.
2. Wide Speed Range:
V pulleys offer a wide speed range capability. By using different-sized pulleys, the speed ratio between the driving source and the driven component can be adjusted. This flexibility allows for the adaptation of power transmission systems to meet specific speed requirements, enabling optimal operation in various applications.
3. Shock and Vibration Dampening:
V pulleys have inherent shock and vibration dampening properties. The elasticity of the V-belt absorbs shocks and vibrations, reducing their transmission to the driven components. This feature helps to protect the machinery and equipment from excessive wear and damage, enhancing their reliability and lifespan.
4. Compact Design:
V pulleys offer a compact design compared to other types of pulleys. The V-belt drive system requires less space, making it suitable for applications where space constraints exist. The compact design also allows for efficient power transmission in tight or confined areas.
5. Cost-Effective:
V pulleys are cost-effective compared to other power transmission systems. They are relatively simple in design and construction, making them more affordable to manufacture, install, and maintain. Additionally, V-belts have a longer service life compared to other types of belts, reducing the frequency and cost of replacement.
6. Easy Installation and Maintenance:
V pulleys are easy to install and maintain. The split design of some V pulleys allows for easy installation or replacement without the need to disassemble the entire system. Additionally, V-belts are generally easy to tension and adjust, simplifying maintenance tasks and reducing downtime.
7. Versatility:
V pulleys offer versatility in power transmission applications. They can accommodate a wide range of power requirements, making them suitable for various industries and systems. Additionally, V pulleys can transmit power over long distances without a significant loss in efficiency, allowing for flexibility in system design and layout.
These advantages make V pulleys a popular choice for power transmission in a wide range of applications. Their high efficiency, speed range capability, shock absorption, compact design, cost-effectiveness, ease of installation and maintenance, and versatility contribute to their widespread use in numerous industries and machinery.
editor by CX
2024-03-11