China supplier OEM Belt Conveyor Pulley High Wear Resistance Head Ceramic Drive Tail Snub Bend Take up CZPT Grooved Rubber Lagging Drum Pulley pulley belt

Product Description

Conveyor Pulley is
manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.

Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.
Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths.
Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction.
Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths.
Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.

The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) . 
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided. 
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.

PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley.
DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt.
HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel.
CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also.
CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley.
WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt.

The Components of Pulley:

1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing.
2.Diaphragm Plates: The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements.
3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped.
4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates.
5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates.
6.LaggingIt is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material.
7.Bearing: Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing.

The Production Process of Pulley:

Our Products:

1.Different types of Laggings can meet all kinds of complex engineering requirements.
2.Advanced welding technology ensures the connection strength between Shell and End-Disk.
3.High-strength Locking Elements can satisfy torque and bending requirements.
4.T-shape End-Discs provide highest performance and reliability.
5.The standardized Bearing Assembly makes it more convenient for the end user to replace it.
6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque.
7.Low maintenance for continued operation and low total cost of ownership.
8.Scientific design process incorporating Finite Element Analysis.

Our Workshop:


  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
US$ 40/Piece
1 Piece(Min.Order)


Order Sample

Free sample


Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.


What safety considerations should be kept in mind when working with V pulleys?

Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:

1. Proper Guarding:

Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.

2. Lockout/Tagout Procedures:

Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.

3. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.

4. Training and Education:

Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.

5. Inspection and Maintenance:

Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.

6. Load and Speed Limits:

Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.

7. Risk Assessment:

Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.

It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.


What is the role of V pulleys in HVAC systems and air conditioning units?

V pulleys play a significant role in HVAC (Heating, Ventilation, and Air Conditioning) systems and air conditioning units by facilitating efficient power transmission and driving various components. Here’s a detailed explanation of the role of V pulleys in HVAC systems and air conditioning units:

1. Blower Motor Drive:

In HVAC systems and air conditioning units, V pulleys are commonly used to drive the blower motor. The blower motor is responsible for circulating air through the system, facilitating the movement of conditioned air into the desired space. The V pulley provides the necessary power transmission to drive the blower motor efficiently.

2. Fan Drive:

V pulleys are also employed in HVAC systems to drive fans that assist in airflow and heat exchange. These fans include condenser fans, evaporator fans, and circulation fans. The V pulley connects the motor to the fan, enabling the fan to operate at the desired speed to enhance heat transfer and air circulation.

3. Belt-Driven Compressors:

In some HVAC systems and air conditioning units, V pulleys are used in conjunction with belt-driven compressors. The compressor is responsible for pressurizing and circulating the refrigerant throughout the system, facilitating the cooling process. The V pulley provides power transmission from the motor to the compressor, allowing for efficient operation of the cooling system.

4. Speed Control:

V pulleys allow for speed control in HVAC systems and air conditioning units. By using pulleys of different sizes, the speed ratio between the motor and the driven components can be adjusted. This flexibility in speed control enables precise airflow regulation and cooling capacity adjustment based on the specific requirements of the space being conditioned.

5. Belt Tensioning and Alignment:

Proper tensioning and alignment of the belts are essential for efficient power transmission and to prevent belt slippage or premature wear. V pulleys in HVAC systems are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the belts and ensure proper belt alignment. Proper tensioning and alignment contribute to the overall efficiency and longevity of the system.

6. Noise Reduction:

V pulleys, along with properly tensioned belts, contribute to the smooth and quiet operation of HVAC systems and air conditioning units. The design of V pulleys, combined with the flexibility and smooth engagement of V-belts, minimizes noise generation, providing a quieter environment for occupants.

7. Durability and Maintenance:

V pulleys used in HVAC systems and air conditioning units are typically made of durable materials such as steel or aluminum. These materials can withstand the demanding conditions of HVAC operation, including high temperatures and continuous use. Regular maintenance, including inspection, lubrication, and occasional belt replacement, ensures the continued efficiency and reliability of the V pulley system in HVAC applications.

Overall, V pulleys are integral components in HVAC systems and air conditioning units, enabling efficient power transmission, precise speed control, and reliable operation of blower motors, fans, compressors, and other components. Their design features, combined with properly tensioned belts, contribute to the overall performance, airflow, and cooling capacity of HVAC systems, ensuring optimal comfort and energy efficiency in various indoor environments.


What is a V pulley, and how does it function in mechanical systems?

A V pulley, also known as a V-belt pulley or a sheave, is a mechanical component used in power transmission systems. Here’s an explanation of what a V pulley is and how it functions:

A V pulley is a pulley with a V-shaped groove on its outer circumference. It is typically made of metal, such as cast iron or steel, and is designed to work in conjunction with V-belts, which are flexible rubber belts with a trapezoidal cross-section. The V pulley and V-belt combination form a friction-based power transmission system.


The primary function of a V pulley is to transmit power between a driving source, such as an electric motor or an engine, and a driven component, such as a pump, a generator, or a machine. The V-belt wraps around the V pulley, fitting into the groove, and forms a frictional contact. When the driving source rotates the V pulley, the friction between the V-belt and the pulley enables the transfer of rotational motion and torque to the driven component.


1. Slip Reduction: The V-shaped groove on the pulley and the corresponding shape of the V-belt create a wedging action that enhances the grip between the pulley and the belt. This reduces the likelihood of slippage, even under heavy loads or during sudden changes in speed or direction.

2. High Torque Transmission: The design of the V pulley allows for the transmission of high levels of torque. The wedging action and increased contact area between the pulley and the belt enable efficient power transfer without excessive belt tension.

3. Speed Variation: By changing the diameter of the V pulley, different speed ratios can be achieved in the power transmission system. This provides flexibility in adjusting the speed of the driven component relative to the driving source, allowing for proper matching of operational requirements.

4. Damping Effect: The flexibility of the V-belt and the slight elasticity of the rubber material provide a damping effect, which helps mitigate vibrations and shocks in the mechanical system. This contributes to smoother operation, reduced noise, and increased component longevity.

5. Ease of Installation and Maintenance: V pulleys are relatively easy to install and maintain. The V-belts can be easily tensioned or replaced when necessary, and the pulleys can be readily mounted on shafts or bearings using standard mounting techniques.


V pulleys find widespread use in various mechanical systems, including:

  • Automotive applications, such as in engines, water pumps, and air conditioning compressors.
  • Industrial machinery, such as conveyor systems, agricultural equipment, and machine tools.
  • HVAC systems, where V pulleys are used in fans, blowers, and pumps.
  • Power transmission systems in appliances, such as washing machines, dryers, and power tools.

By utilizing V pulleys in mechanical systems, efficient and reliable power transmission can be achieved, enabling the smooth operation of various devices and equipment.

China supplier OEM Belt Conveyor Pulley High Wear Resistance Head Ceramic Drive Tail Snub Bend Take up CZPT Grooved Rubber Lagging Drum Pulley   pulley belt	China supplier OEM Belt Conveyor Pulley High Wear Resistance Head Ceramic Drive Tail Snub Bend Take up CZPT Grooved Rubber Lagging Drum Pulley   pulley belt
editor by CX